Landcruiser 200 sliding cargo tray
Landcruiser 200 Quick release sliding cargo trays.
The Landcruiser 200 sliding cargo tray only takes moments to install & even less time to remove using patented fittings. No modification are required to your vehicle to use this cargo tray. This means the extra seats are still able to be used when needed.
The landcruiser 200 sliding cargo tray has heavy duty stainless steel anchor loops on either side of the main tray to enable you to securely strap your load down in transit. Your cargo has never been better looked after.
In floor tie downs commonly used for fridges can be put into the floor of the tray in positions to suit. They do not interfere with other cargo.
The majority aluminium construction means the tray is light & the clever design makes it extremely strong and low to the floor of the boot. (Tray deck is 7cms above floor).
The Landcruiser 200 sliding cargo tray has high sides so your cargo is kept in place during transit even on the roughest roads or tracks.
The handle & locking system is very strong and only one hand is needed to operate it. Lift the handle to unlock the tray, let go & the tray locks into one of the convenient locking positions. A safety provision for heavy loads on inclines.
Extend the tray to its full 850mm extension & you can access all of your cargo easily & safely.
220kg Carrying capacity means you can carry a large cargo.
All steel parts are either stainless steel or zinc plated & the tray itself has a stylish textured powder coated finish. So washing is not a problem.
For more information contact Jon
Landcruiser 200 Bolt in sliding cargo trays.
This product bolts into the seat mounting points from the removed third row. No modification is required to your vehicle & can be removed by undoing 4 bolts.
The clever design means the aluminium construction is light but strong enough to carry 400kg.
Tray deck is 7cms above floor of the vehicle so wasted space is kept to a minimum.
High sides for cargo retention even on the roughest terrain.
For larger or fragile cargo stainless steel loop style strapping points are along each side of the tray.
850mm extension means 85% of your boot area is accessible from out side of your vehicle.
The handle & locking system is very strong and only one hand is needed to operate it. Lift the handle to unlock the tray, let go & the tray locks into one of the convenient locking positions. A safety provision for heavy loads on inclines.
All steel parts are either stainless steel or zinc plated & the tray itself has a stylish textured powder coated finish. So washing is not a problem.
6 extra storage compartments with the addition of side boxes.
For more information contact Jon
For customization of these trays please see custom cargo trays
Ezi Reach trays are made near Gatton in South-East Queensland but shipped Australia wide and beyond.
Locking System
Both of the Ezi Reach cargo trays for the Landcruiser 200 uses the same locking system which is extremely strong & has safety features that set it way above it's competition.
Pull up the handle to release the locks. If the load is getting away from you simply let go of the handle & the tray locks securely into place. One hand is all you need to operate this sliding cargo tray.
Construction
The Ezi Reach sliding cargo tray for the Landcruiser 200 is 100% corrosion resistant.
All steel components are zinc plated or stainless & after assembly the unit has a stylish easy to clean powder coating applied to Australian standards that will last for many years.
Custom fit
The Landcruiser 200 sliding cargo trays are made to utilise as much of the available space as possible . Weather you want the convenience of being able to still use the third row of seats or have removed them & want to carry heavier loads.
Safe & Convenient
Pull up the handle of an Ezi reach cargo tray to bring your cargo out to you, very convenient and safe.
Aluminium construction
The clever design & aluminum construction means the Ezi reach cargo tray is lightweight but strong.
